بحث

العنوان رقم المستند
القطاع السنوات
TC ICS

المعايير

Structural steel equal and unequal leg angles - Part 1: Dimensions

This European Standard specifies requirements for the nominal dimensions of hot-rolled equal and unequal leg angles. This European Standard does not apply to angles with square roots. These requirements do not apply to equal and unequal leg angles rolled from stainless steel.


Structural steel equal and unequal leg angles - Part 2: Tolerances

This part of the standard NL EN 10056 specifies tolerances in shape dimensions and mass of hot rolled structural steel equal and unequal leg angles. the sizes of these angles are given in EN 10056-1.


Hot rolled square steel bars for general purposes - Dimensions and

This European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled finished square steel bars for general purposes.


Hot-rolled steel plates 3 mm thick or above - Tolerances on

This European Standard specifies tolerances on dimensions and shape for hot-rolled non-alloy and alloy steel plates with the following characteristics: a) Nominal thickness: 3 mm ≤ t ≤ 400 mm; b) Nominal width: w ≥ 600 mm. Tolerances for products of width w < 600 mm cut or slit from plate should be agreed between manufacturer and purchaser at the time of enquiry and order. This European Standard applies, but is not limited, to steel grades defined in EN 10025-2 to EN 10025-6:2004+A1:2009, EN 10028-2 to EN 10028-6, EN 10083-2 and EN 10083-3, EN 10084, EN 10085, EN 10149-2 and EN 10149-3, EN 10207 and EN 10225 (see also Annex A). It does not apply to stainless steels. This European Standard does not include round plates, custom-made plates, chequer or bulb plate for flooring and wide flats.


Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on

This document specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel flat bars and steel wide flats for general purposes. This document is not applicable to spring leaves, see EN 10092-1.


Hot rolled hexagon steel bars for general purposes - Dimensions

This European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel hexagon bars.


Information technology — Security techniques — Electronic discovery —Part 1: Overview and concepts

Electronic discovery is the process of discovering pertinent Electronically Stored Information (ESI) or data by one or more parties involved in an investigation or litigation, or similar proceeding. This document provides an overview of electronic discovery. In addition, it defines related terms and describes the concepts, including, but not limited to, identification, preservation, collection, processing, review, analysis, and production of ESI. This document also identifies other relevant standards (e.g. ISO/IEC 27037) and how they relate to, and interact with, electronic discovery activities. This document is relevant to both non-technical and technical personnel involved in some or all of the electronic discovery activities, and it is not intended to contradict or supersede local jurisdictional laws and regulations, so exercise care to ensure compliance with the prevailing jurisdictional requirements.


Information technology — Security techniques — Electronic discovery —Part 3: Code of practice for el

This document provides requirements and guidance on activities in electronic discovery, including, but not limited to, identification, preservation, collection, processing, review, analysis and production of electronically stored information (ESI). In addition, this document specifies relevant measures that span the lifecycle of the ESI from its initial creation through to final disposition. This document is relevant to both non-technical and technical personnel involved in some or all of the electronic discovery activities. It is important to note that the requirements and guidance are not intended to contradict or supersede local jurisdictional laws and regulations and it is expected that care is exercised by the user to ensure compliance with the prevailing jurisdictional requirements.


Information technology — Security techniques — Information

This part of ISO/IEC 27036 specifies fundamental information security requirements for defining, implementing, operating, monitoring, reviewing, maintaining and improving supplier and acquirer relationships. These requirements cover any procurement and supply of products and services, such as manufacturing or assembly, business process procurement, software and hardware components, knowledge process procurement, Build-Operate-Transfer and cloud computing services. These requirements are intended to be applicable to all organizations, regardless of type, size and nature. To meet these requirements, an organization should have already internally implemented a number of foundational processes, or be actively planning to do so. These processes include, but are not limited to, the following: governance, business management, risk management, operational and human resources management, and information security.


Information technology — Security techniques — Information

This part of ISO/IEC 27036 provides product and service acquirers and suppliers in ICT supply chain with guidance on: a) gaining visibility into and managing the information security risks caused by physically dispersed and multi-layered ICT supply chains; b) responding to risks stemming from the global ICT supply chain to ICT products and services that can have an information security impact on the organizations using these products and services. These risks can be related to organizational as well as technical aspects (e.g. insertion of malicious code or presence of the counterfeit information technology (IT) products); c) integrating information security processes and practices into the system and software lifecycle processes, described in ISO/IEC 15288 and ISO/IEC 12207, while supporting information security controls, described in ISO/IEC 27002. This part of ISO/IEC 27036 does not include business continuity management/resiliency issues involved with the ICT supply chain


Information technology — Security techniques — Information security for supplier relationships —Part

This document provides cloud service customers and cloud service providers with guidance on a) gaining visibility into the information security risks associated with the use of cloud services and managing those risks effectively, and b) responding to risks specific to the acquisition or provision of cloud services that can have an information security impact on organizations using these services. This document does not include business continuity management/resiliency issues involved with the cloud service. ISO/IEC 27031 addresses business continuity. This document does not provide guidance on how a cloud service provider should implement, manage and operate information security. Guidance on those can be found in ISO/IEC 27002 and ISO/IEC 27017. The scope of this document is to define guidelines supporting the implementation of information security management for the use of cloud services.


Quality requirements for fusion welding of metallic materials —

This part of ISO 3834 gives guidelines for the implementation of requirements given in the other parts of ISO 3834, and is intended to help manufacturers and users select that part of ISO 3834 appropriate to their needs. It is expected that they will already be familiar with ISO 3834 as a whole.


Gas welding equipment — Safety devices — Part 1: Devices incorporating a flame (flashback) arrestor

or compressed air incorporating a flame (flashback) arrestor used downstream of manifold, cylinder and/or pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. This document does not specify the location of these devices in the gas system. This document is not applicable to safety devices not incorporating a flame arrestor, covered by ISO 5175-2. This document does not apply to the use of safety devices incorporating flame arrestors for applications with premixed oxy/fuel or air/fuel gas supply systems, e.g. downstream of gas mixers or a generator to produce hydrogen/oxygen mixture by electrolytic decomposition of water.


Gas welding equipment — Safety devices — Part 2: Devices not incorporating a flame (flashback) arres

This document specifies the general requirements and tests for safety devices for fuel gases and oxygen or compressed air which do not incorporate a flame (flashback) arrestor used downstream of manifold, cylinder and/or pipeline outlet regulators, and upstream of blowpipes for welding, cutting and allied processes. This document does not specify the location of these devices in the gas system. This document in not applicable to safety devices which incorporate a flame arrestor, covered by ISO 5175-1.


Gas welding equipment — Materials for equipment used in gas

This International Standard specifies the general, and some of the special, requirements on materials used for the construction of equipment used in gas welding, cutting and allied processes. Additional requirements on materials for some equipment are given in other standards. This International Standard is not applicable to materials used for the construction of welding hoses which are specified in ISO 3821.


Plastics - Recycled Plastics - Characterization of polystyrene

This European Standard defines a method of specifying delivery condition characteristics for polystyrene (PS) recyclates. It gives the most important characteristics and associated test methods for assessing a single batch of PS recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of recycled PS to agree on specifications for specific and general applications. This standard does not cover the characterisation of plastics wastes. See EN 15347. This standard is applicable without prejudice to any existing legislation.


Plastics - Recycled Plastics - Plastics recycling traceability and

This European Standard specifies the procedures needed for the traceability of recycled plastics. This gives the basis for the calculation procedure for the recycled content of a product. This standard is applicable without prejudice to any existing legislation. NOTE The procedures are needed to formulate or describe the traceability, while the traceability can be used as a basis for calculating the recycled content


Plastics - Recycled Plastics - Characterisation of Polyethylene

This European Standard defines a method of specifying delivery conditions for polyethylene (PE) recyclates. It gives the most important characteristics and associated test methods for assessing PE recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of recycled PE to agree on specifications for specific and generic applications. This standard is applicable without prejudice to any existing legislation. This standard does not cover the characterisation of plastics wastes. See EN 15347.


Plastics - Recycled Plastics - Characterisation of

This European Standard defines a method of specifying delivery conditions for Polypropylene (PP) recyclates. It gives the most important characteristics and associated test methods for assessing a single batch of PP recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of recycled PP to agree on specifications for specific and general applications. This standard does not cover the characterisation of plastics wastes. See EN 15347. This standard is applicable without prejudice to any existing legislation.


Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates

This European Standard defines a method of specifying delivery conditions for poly(vinyl chloride) (PVC) recyclates. It gives the most important characteristics and associated test methods for assessing of PVC recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of recycled PVC to agree on specifications for specific and generic applications. This European Standard does not cover the characterization of plastics wastes. See EN 15347. This European Standard is applicable without prejudice to any existing legislation.


Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates

This European Standard defines a method of specifying delivery conditions for poly(ethylene terephthalate) (PET) recyclates. It gives the most important characteristics and associated test methods for assessing PET recyclates intended to be used for the production of semi-finished/finished products. It is intended for use by the supplier and purchaser of such materials, to assist them in agreeing on specifications. This European Standard is applicable without prejudice to any existing legislation.


Cranes -- Access, guards and restraints -- Part 4: Jib cranes

This part of ISO 11660 establishes the particular requirements relating to access, guards and restraints for jib cranes as defined in ISO 4306-1. ISO 11660-1 establishes the general requirements for access to control stations and other areas of cranes as defined in ISO 4306-1, during normal operations, maintenance, inspection, erection and dismantling. It also deals with guards and restraints in general, concerning the protection of persons on or near the crane with regard to moving parts, falling objects or live parts


Cranes -- Access, guards and restraints -- Part 5: Bridge and gantry cranes

This part of ISO 11660 establishes the particular requirements relating to the access, guards and restraints for bridge and gantry cranes as defined in ISO 4306-1 and gives criteria for the selection of the appropriate equipment under the various conditions of use expected of the crane


Mobile cranes -- Presentation of rated capacity charts

ISO 11661 specifies a standard presentation or format for mobile crane rated capacities on rated capacity charts. This International Standard is applicable to mobile cranes fitted with jibs as defined in ISO 4306-2 and when used in the lifting mode.


Cranes -- Spare parts manual

This International Standard establishes guidelines on the general requirements necessary for the preparation and presentation of spare Parts manuals for cranes.


Cranes -- Maintenance manual -- Part 1: General

This part of IS0 12478 establishes guidelines on the general requirements necessary for the preparation and presentation of maintenance manuals for cranes.


Paints and Varnishes - Emulsion Interior Paints (White and Tints)

1.1. This standard is for a white or colored flat, velvet, egg shell, satin, semi-gloss and gloss, latex based paint intended for use top coat on new or previously painted interior wall and ceiling surfaces in residential and commercial environments including gypsum wallboard, plaster, concrete or primed wood surfaces. 1.2. This material is not intended for use on new woods prone to extractive bleeding (i.e. cedar) unless a stain blocking primer is applied first. 1.3. Glossy, previously painted surfaces should be dulled by sanding, and primed with an appropriate primer, prior to the application of this paint. Surfaces with repairs or other areas of varied porosity shall be primed with a qualified primer-sealer. 1.4. This standard does not cover paint intended for food contact use. 1.5. The tests specified in this standard may involve the use of materials or equipment that in their storage, handling, use, or disposal may pose a danger to the environment and /or testing personnel. Conformance to the pertinent national safety and environmental requirements is the responsibility of the user of this standard.


Glass Containers — Internal Pressure Resistance — Test Methods

This European Standard specifies two test methods for the determination of the internal pressure resistance of glass containers, Method A by application of uniform internal pressure for a predetermined period and Method B by application of internal pressure increasing at a predetermined constant rate.


Glass Containers — Resistance to Vertical Load — Test Method

This European Standard specifies a method for determination of the resistance of glass containers to external force in the direction of the vertical axis.


Glass Bottles - Verticality - Test Method

This International Standard specifies a test method for determination of the verticality of glass bottles. NOTE 1 Deviation from the vertical axis may Cause difficulties on fast-filling lines. This test method determines not only the deviation of the whole body from the vertical, but also the combined effect of various deformations which may also be present, e.g. the deviation of the neck from vertical, offset finish and ovality of the finish (ring).


Glass Containers - Height and Non-Parallelism of Finish with Reference to Container Base – Test methods

This International Standard specifies test methods for determining the height and the non-parallelism of finish with reference to the container base of glass containers.


Glass Containers — Vacuum Lug Finishes — Part 2: 33 Medium

This part of ISO 9100 specifies the dimensions of a vacuum lug finish with a nominal size of 33 mm medium for wide-mouth glass containers.


Glass Containers — Vacuum Lug Finishes — Part 3: 38 Regular

This part of ISO 9100 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers.


Glass Containers — Vacuum Lug Finishes — Part 4: 38 medium

This part of ISO 9100 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.


Glass Containers — Vacuum Lug Finishes — Part 5: 43 and 48 Regular

This document specifies the dimensions of vacuum lug finishes with a nominal size of 43 mm and 48 mm regular for wide-mouth glass containers.


Glass Containers — Vacuum Lug Finishes — Part 6: 53 and 58 regular

This document specifies the dimensions of vacuum lug finishes with nominal sizes of 53 mm and 58 mm regular for wide-mouth glass containers


Glass Containers — Vacuum Lug Finishes — Part 7: 58 Deep

This document specifies the dimensions of vacuum lug finish with nominal size of 58 mm deep for wide-mouth glass containers


Office furniture - Work tables - Part 2: Safety, strength and durability requirements

This European Standard specifies safety, strength and durability requirements for work tables and desks for office tasks to be undertaken in a seated, a sit-stand or standing position. It does not apply to other tables in the office area, which are covered by EN 15372. Annex A (informative) contains a test for the deflection of tables tops. Annex B (informative) contains an example of calculation of the stiffness of the structure.


Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of outdoor seating for adults, without regard to materials, design/construction or manufacturing processes. It does not apply to street furniture. It does not apply to removable upholstery and covering. It does not include requirements for the durability of castors/wheels and height adjustment mechanisms. It does not include requirements for electrical safety. It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture. The test requirements contained within this standard are based on use by persons weighing up to 110 kg.


Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements for tables

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of outdoor tables for adults, without regard to materials, design/construction or manufacturing processes. It does not apply to street furniture. With the exception of stability tests the standard does not provide assessment of the suitability of any storage features included in tables. It does not include requirements for the durability of castors/wheels and height adjustment mechanisms. It does not include requirements for electrical safety. It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture.


Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

This European Standard specifies test methods for assessing the safety of children's cots and folding cots for domestic use. It applies to children’s cots and folding cots with an internal length greater than 900 mm but not more than 1 400 mm.


Earth-moving machinery — Operator enclosure environment — Part 1: Terms and definitions

ISO 10263 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. This part of ISO 10263 gives the terms and definitions which are used in other parts of ISO 10263.


Earth-moving machinery — Operator enclosure environment —

This part of ISO 10263 specifies a uniform test method to determine performance levels of operator enclosure panel-type air filters used to filter the air entering an earth-moving machine operator enclosure with a powered fresh air system.


Earth-moving machinery — Operator enclosure environment —

This part of ISO 10263 specifies a test method which will provide for uniform measurement of the maximum pressurization inside an operator enclosure of an earth-moving machine when equipped with a pressurization system.


Standard for infant formula

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في المحضّرات الغذائيّة المعدّة للرضّع. كما تشمل طرق أخذ العينات والاختبار وشروط التعبئة والتخزين والنقل و التّوسيم التّغذوي. لا يسمح لأ


Standard for Follow- Up Formula intended for infants from 6 to 12 months and for young children from

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في الغذاء المتابع. ولا تطبق هذه المواصفة القياسية على الغذاء البديل لحليب الأم للرضع تحت السّتّة أشهر.


Essential oil of caraway (Carum carvi L.)

This International Standard specifies certain characteristics of the essential oil of caraway (Carum carvi L.), in order to facilitate assessment of its quality.


Oil of juniper berry (Juniperus communis L.)

This International Standard specifies certain characteristics of oil of juniper berry (Juniperus communis L.), with a view to facilitating the assessment of its quality.


Oil of mandarin petitgrain (Citrus reticulata Blanco)

This International Standard specifies certain characteristics of the oil of mandarin petitgrain (Citrus reticulata Blanco), in order to facilitate assessment of its quality.


Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)]

This International Standard specifies certain characteristics of the oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)], in order to facilitate assessment of its quality.